How to Insulate Your Home with Foam Spray Insulation

Today I’m going to show you how to use a two-part spray foam insulation package. There’s a lot of different manufacturers of these packages so it just depends on what kind of package is available in your area.

Even though I’m going to show you how to use this particular brand, make sure you read all the safety instructions and the user manual in whatever package you get just to be sure, that way if there’s any differences from manufacturer to manufacturer you’ll know.

The Spray Kit

Okay so the one we’re discussing today is a what they call a ‘Spray Foam 200 Kit‘, so what they’re saying is that the yield on it will be about two hundred square feet worth of foam at one inch thick.

We’re going to be spraying close to two inches thick here so we’ll be hopefully getting around 100 square feet out of these two cans at two inches thick. Once I open up the box some of the first things you find is you’re going to find the instruction manual as well as the safety equipment that’s needed, with a lot of little tips and tricks so make sure you read that over well.

Most of these guys have 1-800 numbers and websites as well so if you have other questions you can get ahold of somebody to ask questions too.

What’s In The Box

You should find an assortment of some different spray nozzles, these guys send two different types. This particular nozzle here is just for spraying gaps and cracks and that sort of thing, it’s going to send out a stream so that would be that one here.

This one here is a fan tip, it’s got a bit of a v-notch cut in the end so this one’s
going to spray out about an eight inch or so fan width of pattern which is good for filling wall cavities like what we’re going to do here. So you’ll have a bit of a selection of the of the tips in there.

This particular kit comes with two two containers – two steel cylinders, this particular one already has the hoses and the gun already hooked to it that does have a bit of a carrying handle here as well some of the bigger kits they’re going to have tanks. The tanks are much larger so they comes boxed separately just because they’re too heavy to carry as one unit so in here, like I said this one the the gun and the hoses are already attached to the tanks some of them you will it will come with a wrench and you may have to attach your own hoses and gun.

Before You Start Spraying

A couple things to go over, I guess since I’ve got the gun out putting on the tips would be a good start. It’s worth mentioning that the gun has a bit of a safety trigger here, this one so the yellow button down here has to be compressed or pressed before you can actually squeeze the trigger.

The tanks are still turned off by the way so you don’t want to turn them on until you’re actually ready to spray. This gun has a safety on it to attach a nozzle, just get it orientated right (there’s usually some marks in the end of the gun that correspond to the way the nozzle looks) and just push it in. There is a little lever here, you should hear it click in like that and just look to make sure that the little the lever hooks down on the lock knob.

How It Works

What happens is the two components each come in their own hose and once they hit the nozzle there’s a kind of a spiral setup inside of the nozzle here that actually starts to mix the two foams. Because until the two products mixed together and they don’t actually have the chemical reaction which causes them to expand and cure, so if you stop for too long it starts to set up in here and it clogs and it’s not going to work properly.

That’s why they send you multiple ones so if you stop, pop your tip off put a new one on and where you go again. They also in this bag sent some petroleum jelly so what they’d like you to do is smear some of the jelly right inside of the gun here and that just helps to allow your your tips not to seal up rate at the end of the gun so you can just throw your tip way put anyone on and everything should be fine.

Preparing The Tanks

Your tanks need to be about twenty four degrees Celsius or near to it, which would be about 75 degrees Fahrenheit to get the most yield out of them and to make everything work properly so keep them somewhere stored warm. If spraying professionally, you can actually buy professional spray foam hose covers which insulate your hoses and ensure you’re spraying the insulation at an optimal temperature.

You can spray on to a cooler surface but you don’t want something that’s frosty and wet so like here, where we’re doing this in February it’s quite cold so the wall is cool but it’s actually still about two degrees Celsius so and there’s no frost present.

Once we’re ready to go we’re going to shake both tanks really well for between 30-40 seconds and then open both valves on the tanks completely, you’re going to see the product start to come down the line and once it fills up the lines.

Agitating the tanks will just get things mixed together properly, so once done open your valves and let it bleed into the lines. Apply your petroleum jelly get your tip is ready and and then you’re pretty much close to being ready to spray.

Join me next week for part 2 of this how to spray foam insulation guide.

How to Save Money When Replacing Your Home Carpet

Let’s talk about the five ways to save money when buying carpet for your home. It’s all quite obvious, but often ignored.

1. Rip Out Your Old Carpets Yourself

First way is going to be rip out your own carpet because if you let them do it, they’re gonna charge about 50$ per room. So if you’ve got four rooms, you’re gonna end up paying around 200 bucks before they even start. Just rip it out and take it up to the dump yourself and save yourself 200$.

2. Move Your Own Furniture

Move your own furniture because you’re gonna be charged another fifty dollars per room, so you’re saving another 200 bucks right there. Already saved 400 bucks just getting the rooms prepared for them to arrive.

It can be difficult to know what to do with all the furniture whilst the carpet is being fitted, I suggest getting as much as possible into one room in a logical order, and slowly move it back as rooms as carpeted and the fitters move onto the next.

3. Buy From A Local Dealer

Buy from a local dealer rather than a big store such as Home Depot, because local dealers want your business, they need your business. It’s mom and pop type shops that you’re going to get a better deal at as you’re going to be able to negotiate a little bit better.

A lot of three thousand dollar deals, you could probably go in there and say hey I’d like it for 2,500 bucks Also make sure you get three quotes, it’s almost a it like you do when you’re hiring a contractor.

4. Don’t Buy The Most Expensive Carpet

Another way to save money is don’t buy the most expensive carpet. You know someone says, I want to get the most expensive carpet because I want it to last for 20 years, wall block styles change people change. If anyone remembers hunter green and dusty rose, don’t buy the most expensive because chances are the style is going to change and you’re going to change.

You’re gonna pay a lot of money for the best, you can get something like seventy five percent mid road with a great underlay that is going to do as good, and you can save a thousand bucks right off the bat.

5. Don’t Try Fitting Your Own Carpet

If you’re a handy DIY’er, you might think you can follow a How To Fit a Carpet guide and do it yourself, I really don’t recommend this. It only takes one wrong measurement and you could find yourself cutting a $1000 carpet in the wrong place and rendering it useless.

Find a small, local company by searching online for something like ‘Carpet Fitters Newcastle‘, browse a few businesses and get them to come out for a free home consultation and quote you for fitting.

I hope this helps you save some money when you take the step and decide to replace the carpets in your home.

 

All You Need To Know About Building

The different strategies for building an impermanent building rely on upon what sort of building you really pick. Numerous structures that can be contracted do should be introduced onto a pre-arranged base, others however can be developed specifically onto existing hard ground. Once the base is dealt with the fabricate procedure of most transitory structures is quick and non-troublesome as the building has been made off site; a procedure that is known as construction. Convenient lodge sort structures that are utilized for classrooms, workplaces and other open offices are transported to site and essentially stretched out into place as a prepared to go unit. It’s difficult to significantly consider this as a “manufacture” prepare as the greater part of the genuine building appears to have occurred off-site in the industrial facility.

Other more mechanical structures like stockrooms or capacity structures are unmistakably too huge to transport overall building so they land nearby in measured areas which are collected together. The casings of these structures are generally designed from steel or aluminum. Being fundamentally lighter, aluminum structures do have one of the most effortless and quickest form forms around, in spite of the reality they should be amassed nearby. Something that makes the manufacture procedure for an aluminum brief building so fast is simply the casing. The light qualities make it practical to jolt the edge straightforwardly onto existing level ground.

Base plates are darted to the ground and afterward an inspire test will be conveyed to ensure the building can withstand the greatest up lift constrain. The casing areas are then settled to the base plates and stretched out into place segment by segment. A construct procedure that needn’t bother with any sort of establishments makes significant time and cost investment funds. Truth be told, this kind of development process implies crisis arrangements can be suited. Brief distribution center structures or exchanging stores after flame harm can be introduced nearby and prepared for use inside seven days of the underlying enquiry.

Important Information About Construction

While there are a few sorts of development tasks, the vast majority of them can be categorized as one of two classifications: Building Construction and Industrial Construction. They can cover, however each sort requires its own procedure including arranging, planning, and executing (also the distinctive fundamental licenses). Building development ventures represent by far most of the development business. While a large portion of these are littler ventures (increases and remodels), they additionally incorporate bigger ones, for example, the development of a high rise. The primary sort of building development is business development.

This incorporates development for business utilize high rises, banks, corner stores, lodgings, eateries, general stores, and so on. Clearly, these are for the most part more costly and tedious than private development. Business development is infrequently managed without procuring a development organization as it frequently requires not simply working with, but rather basically having admittance to overwhelming, unsafe apparatus. Private development is the other sort of building development and incorporates flats, apartment suites, town-homes, residences, nursing homes, and some other foundation worked for inhabitants to live in. Private units require a wide range of controls and codes than business development, as they will be utilized as a part of a very different way.

Since these are littler tasks and spending plans, development organizations regularly don’t have a similar kind of assets for private undertakings. These ventures are regularly managed by the sorts of building material accessible in the range, which is the reason wood is by a wide margin the most mainstream. Contingent upon the extent of the venture, numerous occupants embrace the development procedure all alone. This can spare a huge amount of cash, yet can be very tedious and even risky. A specialist for development undertakings can help with any of these. Modern Construction-Modern development is a great deal less successive, yet still imperative to the business.

Stylish Decorating Tips

This article was composed to answer huge numbers of the frequently made inquiries on this point. I trust you discover the majority of this data supportive. When making arrangements for a home enriching venture, it is imperative to take a seat and record your thoughts and objectives. Without an arrangement the experience may end up plainly befuddling and disappointing. There are many subtle elements to work out when wanting to embellish your home, for example, subject, materials and expectations for the space being beautified. It is silly to get up one morning supposing I’ll adorn my lounge area today. It would be a decent thought however without past arranging, dubiously the venture would add up to much. Neglecting to arrange is wanting to come up short.

Home beautifying tips, for example, this are useful. In the wake of scribbling down thoughts and objectives for your home brightening venture, the following stage may be to consider your financial plan, what amount would you be able to bear to spend on redesigning. Materials and extras could be expensive relying upon what you’re brightening arrangements are. In the event that wanting to roll out improvements to your whole home, you ought to have admittance to an adequate measure of cash. Accommodating home designing tips ought to dependably make your financial plan a need.

There are concealed costs when making tremendous upgrades in your home. Preferable safe over sorry. Once the home improving starts, little costs appear to bounce out of the woodwork. Arranging a home beautifying venture that fits your financial plan is a useful home embellishing tip. When you are altogether fixed with respect to the budgetary circumstance, you will need to pick a style or them for your home improving task. There are many to browse and the choice ought to be made in light of your preferences and interests.